Heads and nozzle heads for wet cleaning

Specification
Nozzle WBN head

The diameter of the nozzle 6,5 to 9,5 mm
Thread 50 mm (fits standard Clemco luminaires (NHP 1, NHP 2, NHP 3/4) and replacements)
Material Tungsten Carbide
Water The possibility of connecting water from the water supply network
Case Aluminium
Ability to work without water YES

 

WBA head for wet cleaning

The diameter of the nozzle A standard threaded nozzle can be screwed onto the head 50 mm
Thread 50 mm (fits standard Clemco luminaires (NHP 1, NHP 2, NHP 3/4) and replacements)
Venturi tube YES
Water High pressure water connection required
Case Aluminium
Ability to work without water YES

The wet cleaning head helps keep dust levels under control. It adds a small amount of water to the abrasive (air) stream. Due to the fact that it is mounted in front of the nozzle, the entire abrasive is wetted before leaving the nozzle. Thanks to the valve on the head, dry cleaning is possible without removing the head.

There are 2 types – with an integrated shot blasting nozzle (WBN nozzle) and without it (WBA head).